mega cannon assembly.

Ya it's kinda tricky. I don't have any pics but lemmie try and help as much as I can. The idea is that the gun will elevate once it's put together. The handle goes on the small gear. The small gea does not get glued in place. It rests on the base of the gun in the small half pipe looking spot. The small flat piece with it's center cut out is a brace for the magazine. If you look at the magazine once it's attached you'll see where it fits in place on the back side of the mgazine. There's actually a small indented slot it will fit into. The other to pieces hold the cannon on it's base. If you mess with em you'll see that they only fit in one place. They go over top of the part of the gun with the gears. The gear teeth on the gun will mate with the smaller gear with the handle. By carefully gkuing those small pieces on the gun will elevate as they hold it in place. Hope this helps some.